10. Technical data
Housing dimensions
(W x H x D) in mm
● RB 170 standard unit
● RB 170 comfort unit
● RB 170 bypass unit
Material
Air connections
Condensate drain
Protection class
Degree of protection
G4 outside air filter:
Included with standard unit,
optional with comfort and
bypass unit
G4 exhaust air filter:
Included in all units
F7 pollen filter in comfort
and bypass unit
Permissible ambient
temperature
in installation room
Permissible moisture in
installation room (at 20 °C)
● Standard unit
● Comfort unit
● Bypass unit
Permitted outside air
temperature
Degree of heat provision
Rated voltage
power frequency
595 x 820 x 375
595 x 820 x 375
595 x 820 x 435
Galvanised
sheet steel,
partly powder-
coated
Ø 125 mm
Sleeve with
Ø 28 mm lip
seal, 28x19 mm
reducer for
3/4" hose
1
IP 00
RBG 170
air filter,
class G4
RBG 170
air filter,
class G4
RBF170,
pollen filter,
class F7
+10 ... +40 °C
50 % RH
70 % RH
70 % RH
-15 ... +60 °C
up to 94 %
230 V AC
50 Hz / 60 Hz
Ventilation levels
(factory setting):
Humidity protection
ventilation (interval
operation)
● Reduced ventilation
● Nominal ventilation
● Intensive ventilation
Power consumption (unit)
at 100 Pa Counter
pressure per duct
● 60 m³/h
● 90 m³/h
● 120 m³/h
Weight
● Standard unit
● Comfort unit
● Bypass unit
11. Disposal
Packaging:
Dispose of the packaging
material in compliance with the regulations
valid in the country where you live.
Air filter:
Dispose of the air filter in
compliance with the regulations valid in the
country where you live.
Old units:
The old unit must be dismantled
by a specialist company and disposed of
correctly.
Not in domestic waste. The unit
contains in part material that can be
recycled and in part substances that
should not end up as domestic waste.
12. Appendix
Chapter
Diagrams
12.1
Wiring diagram
RB 170 standard unit
Wiring diagram
12.2
RB 170 comfort unit
12.3
KNX bus concept
11. Disposal │ uk
approx. 57 %
of reduced
ventilation
60 m³/h
90 m³/h
120 m³/h
24 W
35 W
50 W
38 kg
43 kg
47 kg
65