Ventilation Levels Factory Setting; Volumetric Flow Setting With Voltmeter - Aerex Rb 170 L Installationsanleitung

7.3 Ventilation levels factory setting

Supply air (blue potentiometer adjusters)
Exhaust air (red potentiometer adjusters)
7.3.1 Extended setting range for each
ventilation level
The volumetric flow settings for each ventila-
tion level are permanently specified as part of
the factory setting (jumpers 1, 2 and 3 open
 Chapter 6.7.3)  "S" potentiometer.
Alternatively, the volumetric flows can be
adjusted in the extended setting range for
each ventilation level separately (setting
range 40....160 m³/h, control voltage for fans
at each ventilation level freely adjustable from
1.7...10 V).
Jumpers 1 + 2 must be bridged and jumper 3
must be open for the extended setting range.
The control voltage measurement process is
described in the next chapter "Volumetric flow
setting with voltmeter".
Use a suitable measuring
NOTICE
instrument when measuring
the control voltages.
7.3.2 Voltage / volumetric flow table
Volumetric flow
[m³/h]
40
50
60
70
80
90
100
110
120
130
140
150
160
7.4 Volumetric flow setting with
voltmeter
Alternatively, the volumetric flows for the
individual ventilation levels can be adjusted
using a voltmeter.
7. Start-up │ uk
Control voltage
[V]
1,7
2,5
3,3
4,0
4,7
5,3
5,8
6,4
6,9
7,5
8,0
8,5
8,8
61