Maintenance; Disassembly; Disposal; Declaration Of Conformity - Novoferm Tormatic T100 R-Fu 1,5Kw Montage- Und Betriebsanleitung

9

Maintenance

Tasks to be performed before starting maintenance
Hazardous voltage!
DANGER
Fatal electric shock when touching live parts. Ob-
serve the following safety rules when working on
the electrical system:
• Disconnect from the mains.
• Secure against inadvertent switch-on.
• Verify de-energised state.
• Work on the electrical system may only be
performed by skilled electricians or instruc-
ted persons working under the direction and
supervision of a skilled electrician in accord-
ance with the electrotechnical rules and dir-
ectives.
NOTICE NOTICE
For your safety, we recommend that the door
system be checked before initial use and as
needed – at least once a year – in accordance
with the check list in the Inspection chapter. The
check can be carried out by a person with the
corresponding qualification certificate or by a
specialist company.
10

Disassembly

Disassembly is carried out in reverse order of the assembly in-
structions in the Installation chapter.
11

Disposal

Dispose of packaging material in an environmentally friendly way
and in accordance with the applicable local disposal regulations.
The symbol with the crossed-out waste bin on waste elec-
trical or electronic equipment stipulates that this equipment must
not be disposed of with the household waste at the end of its life.
The separate collection of waste electrical and electronic equip-
ment aims to enable the re-use, recycling and other forms of re-
covery of waste equipment as well as to prevent negative effects
for the environment and human health caused by the disposal of
hazardous substances potentially contained in the equipment.
Dispose of the waste electrical or electronic equipment in accord-
ance with national legislation.
UK (The following applies for the United Kingdom)
According to Waste Electrical and Electronic Equipment Regula-
tions 2013 (SI 2013/3113) (as amended) devices that are no
longer usable must be collected separately and disposed of in an
environmentally friendly manner.
12

Declaration of Conformity

Manufacturer's Declaration of Conformity (Translation of the
Original)
In accordance with the EC Machinery Directive 2006/42/EC,
Annex II, Part 1, Section A.
We, Novoferm tormatic GmbH, declare under our sole responsib-
ility that the product described below complies with all relevant
regulations of the EC Machinery Directive in the version
2006/42/EC.
The EC type-examination procedure described in Annex IX was
performed by an approved testing laboratory.
Notified body:
Identification number:
EC type-examination
certificate:
Product model / product:
Product type:
Year of manufacture from:
Suitable for door drives:
Relevant EU directives:
• 2014/30/EU
• 2011/65/EU RoHS Directive including Annex II according to
(EU) 2015/863
Applied harmonised standards:
• EN ISO 12100:2010
• EN 12978:2003+A1:2009
• EN 13241:2003+A2:2016
• EN ISO 13849-1:2015, PL "C" Cat. 2
• EN 60335-1:2012
• EN 60335-1:2012/AC:2014
• EN 60335-1:2012/A11:2014
• EN 60335-1:2012/A13:2017
• EN 60335-1:2012/A15:2021
• EN 61000-6-3:2007/A1:2011
• EN 61000-6-2:2005/AC:2005
Other applied technical standards and specifications:
• EN 12453:2017
• EN 300220-1:2017-05
• EN 300220-2:2017-05
• EN 301489-1:2017
Manufacturer and name of the authorised representative of
the technical documentation:
Novoferm tormatic GmbH
Eisenhüttenweg 6
44145 Dortmund
Place and date of issue:
Dortmund, 20.11.2024
Dr. Mathias Machill, Director Operations Novoferm Tormatic
Declaration of Conformity according to Directive
2014/53/EU
The optional radio system complies with directive 2014/53/EU.
The full text of the declaration of conformity can be found at:
https://www.tormatic.de/dokumentation/
T100 R-FU 1,5kW
TÜV NORD CERT GmbH
Am TÜV 1
45307 Essen
Germany
0044
44 780 13108301
T100 R-FU 1,5kW
Door control
06/2023
Speed Flex Motovario /
SE 6.65 / SE 13.60 / SE 14.50 /
SI 3,5.120 / SI 5.240 / SI 6.115 /
SI 8.180 / SI 14.80 / SI 17.50 /
SI 20.90 / SI 25.60 / SI 30.46 /
SI 35.60 / SI 50.24 / SI 100.10 /
Speed Thermo TD 65.142
EN - 35