Installation And Connection - Conrad Auto-Focus Bedienungsanleitung

E "W" button
Press this button to decrease the zoom factor. This button also serves as navigation button in the setup
menu.
The status LED (red) on the remote control lights up red when a button is pressed.

8. Installation and connection

When selecting a position for your camera, please note that it must not be exposed to
direct sunlight, dust, vibration, heat or cold. Please also note that this device is intended
for dry indoor use only.
No devices with strong magnetic or electric fields, such as mobile phones, electric motors,
etc., must be close to the camera.
Installation
There is a 1/4 inch threaded connection on the bottom of the camera for attaching a suitable tripod or wall
mount.
35