Display And Operating Elements - Conrad Auto-Focus Bedienungsanleitung

7. Display and operating elements

See front fold-out page for illustrations.
1) Connection terminal
This connection terminal comprises connections F, C, Z (Focus, Com, Zoom) and connection 485A and
485B. Connections 485A and 485B are intended for the connection of a high-speed dome camera for
zoom control.
2) Power supply socket
Connect a 12 V/DC power supply here observing the polarity (max. power consumption 230 mA).
3) "POWER" status LED
This LED lights up red when the operating voltage is properly supplied.
4) Cable distance selector switch (signal amplification)
Use this selector switch to amplify the image signal to adjust it to the cable distance.
Position 1 = little amplification, position 2 = medium amplification, Position 3 = strong amplification
33