Operating Elements; Intended Use - Conrad 75 01 91 Bedienungsanleitung

GB
Introduction
Dear Customer,
We thank you for purchasing this Auxiliary Camera.
With this unit, you have acquired a product which has been desi-
gned to the latest technological standards.
This product fulfils the requirements of the applicable Europe-
an and national directives. Conformance to these has been
proven; the relevant statements and documents are lodged
with the manufacturer.
To maintain this condition and to guarantee safe operation, the
user must observe these operating instructions!
Should queries arise, feel free to consult our
Technical Advisory Service:
Tel. +49 (0)180 5 31 21 17
Mon. - Fri. 08.00 to 18.00

Intended use

The Auxiliary Camera is intended for connection to a monitoring sy-
stem (e.g. CCTV Monitor System Part N°: 75 01 76). It is ideally sui-
ted to making secure hidden or critical areas (such as the monito-
ring of shops, entrance and parking areas, use in door communica-
tion systems, etc.). It transmits the received pictures/sounds to the
monitor.
16
Use of the camera without protection (without an appropriate case)
is only permitted in dry indoor areas. Contact with moisture is to be
avoided.
Please note that it might be an offence to observe unknown per-
sons with this camera without their knowledge and agreement.
Any other use than as described above can lead to damage to this
product; moreover, this can be accompanied by hazards such as
for example short-circuit, fire, electric shock, etc.
The product as a whole should not be modified or converted!
The safety instructions are to be followed without fail!

Operating elements

1 Lens
2 IR LEDs
3 Microphone
4 Mini-DIN socket
5 Mini-DIN plug
6 Camera mount
7 Wall fixture drilling holes
8 Wall fixture
9 Clip fixture
10 Wall fixture socket
11 Camera wing screw
(see fold-out page)
17