Cleaning The Inside Of The Unit; Correct Disposal - REHM BOOSTER.PRO 250 Betriebsanleitung

30
Task
Check the functions of the leak current
protection switch.
Connection lines and torch hoses checked by
professionals, check should be logged in the
relevant log book.
Check may need to be carried out more
often in order to meet local regulations.
Have the complete welding equipment
inspected by specialists; check should be
logged in the relevant log book.
Check may need to be carried out more
often in order to meet local regulations.
8.3

Cleaning the inside of the unit

If the REHM welding unit is used in a dusty environment, then the inside of the
unit must be cleaned regularly by vacuuming or blasting.
The frequency of the cleaning process depends on the conditions under which it
is used. Use clean, dry air to clean the unit or a vacuum cleaner.
If maintenance or repair work were carried out on this unit by people who have
not been trained by REHM and thus are not authorised to carry out the work,
your guarantee and warranty claims over REHM will be void.
8.4

Correct disposal

Only applies to countries in the EU.
Do not dispose of electrical tools in the household rubbish.
The European directive 2002/96/EG regarding the disposal of electronic an
electrical goods and the implementation of such in national law means that used
electrical tools must be collected separately and sent for environmentally-friendly
recycling.
Maintenance work
Interval
Daily
(in case of temporary
structures)
Otherwise, monthly
Every six months
Once a year