Ec Declaration Of Conformity - REHM BOOSTER.PRO 250 Betriebsanleitung

We hereby confirm that the following products
meet all the major protection requirements specified in the Council Directive
harmonization of the regulations of the member states relating to electromagnetic compatibility and in the
Directive 2006/95/EEC relating to electrical equipment designed for use within certain voltage limits.
The above products conform to the regulations in this Directive and meet the safety requirements for
equipment used for arc welding in accordance with the following product standards.
EN 60 974-1: 2006-07
Arc welding equipment – Part 1: Welding power supplies
EN 60 974-3: 2004-04
Arc welding equipment – Part 3: Arc ignition and stabilisation equipment
EN 60974-10: 2004-01
Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements
In accordance with the EU Directive 2006/42/EG Article 1, Section. 2, the above products come exclusively
under the scope of Directive 2006/95/EWG relating to electrical equipment designed for use within certain
voltage limits.
This declaration is made on behalf of the manufacturer:
REHM GmbH u. Co. KG Schweißtechnik
Ottostr. 2
73066 Uhingen, Germany
Uhingen, 10.01.2012
Declaration made by

EC Declaration of Conformity

Welding inverter
BOOSTER.PRO 250
BOOSTER.PRO 320
2004/108/EEC
R. Stumpp
Managing Director
on the
39