Accessories; Intended Use - Dometic Buttner Powerpack Basic Montage-, Installations- Und Betriebsanleitung

Designation
Battery monitor MT 5000 iQ
with 200 A shunt and accessories*
Fuse holder ME with fuses (2 x 40 A)
Fuse holder FS-3 with fuses (5 A, 25 A)
Fuse holder FS-1 with fuse (5 A)
Installation and Operating Manual for the
battery control booster
Installation and Operating Manual for the
solar system
Installation and Operating Manual for the
solar charger
Installation and Operating Manual for the
battery monitor
*Find the detailed scope of delivery in the respective installation and
operating manual (see chapter "Related documents" on page 15).
MT Power Pack CLASSIC POWER PLUS
I + II
Designation
Battery control booster
MT BCB 40/40 with accessories
MT PowerPack CLASSIC POWER PLUS I:
Solar system MT 170 MC
with Solar charger MT 230 PP
and accessories*
MT PowerPack CLASSIC POWER PLUS II:
Solar system MT 340-2 MC
with Solar charger MT 350 PP
and accessories*
Battery monitor MT 5000 iQ
with 200 A shunt and accessories
Fuse holder ME with fuses (2 x 80 A)
Fuse holder FS-3 with fuses (5 A, 25 A)
Fuse holder FS-1 with fuse (5 A)
Installation and Operating Manual for the
battery control booster
Installation and Operating Manual for the
solar system
14
Quantity Designation
1 Installation and Operating Manual for the
solar charger
2 Installation and Operating Manual for the
battery monitor
1
*Find the detailed scope of delivery in the respective installation and
2
operating manual (see chapter "Related documents" on page 15).
1

Accessories

Available as accessories (not included in the scope
1
of delivery):
1
Description
Combination kit 1500 W
1
with sine wave inverter MT PL 1500 SI
and mains switching unit MT NU 3600
LiFePO4 battery 105 Ah,
MT LI 105
LiFePO4 battery 120 Ah,
MT LI 120
Quantity

Intended use

1 The accessory kit is intended to monitor and
charge 12 V house batteries in caravans and motor
homes while driving or on the mains. In addition,
1
the accessory kit can be used as a stable power
supply to operate DC powered devices to keep
the batteries fully charged. The accessory kit can
be installed as a stand-alone charging system or as
a supplement to the existing on-board electronics.
This product is only suitable for the intended pur-
pose and application in accordance with these
instructions.
1
This manual provides information that is necessary
for proper installation and/or operation of the
2
product. Poor installation and/or improper operat-
1
ing or maintenance will result in unsatisfactory per-
formance and a possible failure.
2
The manufacturer accepts no liability for any injury
1
or damage to the product resulting from:
• Incorrect assembly or connection, including
1
excess voltage
4445103621
Quantity
1
1
Ref. no.
9620001961
(PP 01500)
9620000237
(MT LI0105)
9620000187
(MT LI0120)