Rehau RAUSIKKO Box MX Einbauanleitung Seite 46

46
06 Installation of the system
EN
The boxes are to be arranged according to the dimensions specified in the planning
documents.
Attention should be paid to the length, width, and height of the system as well as the
number of layers and the orientation of the boxes.
06.01 Channel for inspection and indication for orientation
The elements are to be positioned in a way that creates a continuous channel for
inspection (see below).
Channel for Inspection
The indications for orientation of boxes within the same row have to point in the same
direction.
06.02 Layered installation
The boxes can be arranged in multiple layers by using the integrated pins.
Pins on the top and bottom of Boxes
Indication marks for orientation
When placing two boxes on top of each
other the pins fit into the provided
cavities. The orientation of the columns
should correspond with the respective
columns of the bottom layer in order to
ensure a steady flow and inspection.