Rehau RAUSIKKO Box MX Einbauanleitung Seite 43

43
05 Box assembly
EN
Additional connection elements are not required for the assembly of the
RAUSIKKO Box SX. The components can be connected with the help of integrated
snap-on elements. Only elements of the same type (MX/SX/HX) may be joined
together. Installation of MX side rails on HX base elements, for example, is not
permitted.
05.01 RAUSIKKO Box 8.6 MX / SX / HX
A Box 8.6 MX / SX / HX is assembled by placing the support columns on top of each
other in a way that connects each pin with a receiving hole (see below). The parts
snap together through the application of vertical pressure.
Pin and receiving hole of the basic elements
Assembled Box 8.6 MX / SX / HX
Assembly of a Box 8.6 MX / SX / HX