Audio-Player; Connecting A Multi-Format Player Or An External Decoder - Yamaha RX-V1065 Bedienungsanleitung

Connections
y
• Input sources in parentheses are recommended to connect to the respective jacks. If your Yamaha component has the remote in/out terminal, you can
switch the input source to that component with a single key operation using the SCENE function (page 23).
• You can change the name of the input source displayed on the front panel display as necessary (page 52).
• See page 53 on how to use the ZONE2 OUT jacks.
• When you connect an external component with analog audio and component video (or composite) output jacks, connect the analog audio output to the
AUDIO 1 or AUDIO 2 jacks of this unit while making a video connection (component video or composite). Then select the video to be output when
"AUDIO 1" or "AUDIO 2" is selected as the input source (page 41).
■
Audio player
Output jacks on the connected external component
External component
External component with optical digital
output
External component with coaxial digital
output
External component with analog audio
output
Turntable
y
• We recommend connecting the coaxial digital output terminal of a CD player to the AV3 jack.
• When connecting a turntable with a low-output MC cartridge to the PHONO jacks, use an in-line boosting transformer or MC-head amplifier.
• Connect your turntable to the GND terminal of this unit to reduce noise in the signal.
About audio/video output terminals
Among the analog audio and analog video signals input to this unit via input terminals, the audio/video signals of the
selected input sources are output from the AV OUT jacks and AUDIO OUT jacks. An HDMI input signal,
COMPONENT VIDEO input signal or digital audio input signal cannot be output.
When using the AV OUT jacks: connect an external component to the VIDEO, S VIDEO or analog audio terminal.
When using the AUDIO OUT jacks: connect an external component to the analog audio terminal.
■
Connecting a multi-format player or an
external decoder
This unit is equipped with 8 additional input jacks (Front
L/R, Center, Surround L/R, Surround Back L/R and
Subwoofer) for analog multi-channel input from a multi-
format player, external decoder, etc.
Notes
• When you select "MULTI CH" as the input source, the digital sound field
processor is automatically disabled.
• Since this unit does not redirect signals input at the MULTI CH INPUT
jacks to accommodate for missing speakers, connect at least a 5.1-
channel speaker system when using this feature.
• You can specify a video signal to be output during a multi-channel audio
reproduction (page 41). If your DVD player has analog multi-channel
output jacks, connect them to the MULTI CH INPUT jacks while making
a video connection (component video or composite).
16
En
Output jack Input source
Optical digital output AV 1 (TV)
AV 4
Coaxial digital output AV 2
AV 3 (CD)
Analog audio output AV 5
AV 6
AUDIO 1
AUDIO 2
Analog audio output PHONO
Input sources/jacks of this unit
Input jack
OPTICAL
OPTICAL
COAXIAL
COAXIAL
Analog audio
Analog audio
Analog audio
Analog audio
Analog audio
CENTER
FRONT SURROUND SUR.BACK SUBWOOFER
MULTI CH INPUT
L R L R R L
Multi-format player or external decoder
(7.1-channel output)