Selecting A Source On The Gui Screen; Muting Audio Output; Adjusting High/Low Frequency Sounds (Tone Control); Enjoying Pure Hi-Fi Sound - Yamaha RX-V1065 Bedienungsanleitung

Playback
Registering input source/sound field
program
Select the desired input source/sound field
program and then press and hold PSCENE (or
hSCENE) key to edit until "SET Complete"
appears on the front panel display.
y
• If you change the input source setting, register the remote control code of
an external component to the input source (page 55).
Switching remotely controlled external
components linked to scene selections
You can operate an external component with the remote
control of this unit by setting a remote control code for the
external component for each input source. Setting remote
control codes for desired input sources allows you to
switch between external components linked to scene
selections.
1
Register the remote control code of an
external component to the desired input
source (page 55).
Note
• This feature is not available for the TUNER input source.
2
While holding down the desired hSCENE
key, press and hold the dInput selection
key to which you registered a remote control
code in step 1.
From now on the external component can be remotely
controllable just by selecting a scene.

Selecting a source on the GUI screen

1
Press iON SCREEN on the remote control.
The GUI screen appears on the video monitor.
BD/DVD
2
Use jCursor k / n repeatedly to switch the
page and jCursor l / h repeatedly to
select the desired source.
Category
Select Scene
Select Media
Select Input
24
En
Select Scene
TV CD RADIO
Source
BD/DVD, TV, CD, RADIO
USB, DOCK, TUNER,
PHONO, V-AUX, MULTI CH
HDMI1-4, AV1-6, AUDIO1/2
y
• If an input source you want to select is available in "Select Scene", you
can select the desired input source and sound field program at once.
3
Press jENTER.

Muting audio output

1
Press uMUTE on the remote control to mute
the audio output.
The MUTE indicator on the front panel display
flashes while audio output is muted.
2
Press uMUTE again to resume audio
output.
Adjusting high/low frequency sounds
(tone control)
You can adjust the balance of the high frequency range
(Treble) and low frequency range (Bass) of sounds output
from the front left and right speakers to obtain desired
tone.
1
Press MTONE CONTROL on the front panel
repeatedly to select "Treble" or "Bass".
The current setting is displayed on the front panel
display.
Treble
2
Rotate the NPROGRAM selector to adjust
the frequency range.
Control range: –10.0 dB to +10.0 dB
The display returns to the previous screen
automatically in few seconds.
Notes
• The tone control settings are not effective when this unit is in the Pure
Direct mode or "MULTI CH" is selected as an input source.
• If you set the balance extremely off, sounds may not match those from
other channels well.

Enjoying pure hi-fi sound

Use Pure Direct mode to enjoy the pure high fidelity
sound of the selected source. When Pure Direct mode is
activated, this unit plays back the selected source with the
least circuitry.
Press QPURE DIRECT (or gPURE DIRECT)
to turn the Pure Direct mode on or off.
QPURE DIRECT lights up when you set Pure Direct
mode on.
0.0dB