Connecting The Power Cable; Turning This Unit On And Off - Yamaha RX-V1065 Bedienungsanleitung

Connecting the power cable

After all connections are complete, plug the power cable
of this unit into an AC wall outlet.
NE2/PRESENCE
CLASS 2 WIRING

Turning this unit on and off

1
Press KMAIN ZONE ON/OFF on the front
panel (or pPOWER on the remote control)
to turn on this unit.
2
Press KMAIN ZONE ON/OFF (or
pPOWER) again to turn off this unit
(standby mode).
y
• The unit needs a few seconds until ready to play back.
• You can also turn on this unit by pressing PSCENE (or hSCENE).
• This unit consumes a small amount of electricity even in the standby
mode. We recommend disconnecting the power cable from the AC wall
outlet.
Caution
Do not unplug this unit while it is turned on. Doing so
may damage this unit or cause the settings of this unit
to be saved incorrectly.
To the AC wall outlet
Power cable
Connections
19
En