Radio Data System Tuning; Displaying The Radio Data System Information; Selecting The Radio Data System Program Type (Pty Seek) - Yamaha RX-V1065 Bedienungsanleitung

Radio Data System is a data transmission system used by FM stations in many countries. This unit can receive various
Radio Data System data such as "Program Service", "Program Type", "Radio Text", "Clock Time" and "EON"
(enhanced other networks) when receiving Radio Data System broadcasting stations.
Note
• The Radio Data System reception feature is only available in U.K., Europe and Russia models.
Displaying the Radio Data System
information
You can display the 4 types of the Radio Data System
information ("Program Service", "Program Type", "Radio
Text" and "Clock Time") in the front panel display.
1
Tune into the desired Radio Data System
broadcasting station.
• Frequency tuning (page 30)
• Preset tuning (page 31)
y
• You can also use the PTY Seek mode to tune into the desired Radio
Data System broadcasting station from the preset ones.
2
Press DINFO (or fINFO) repeatedly to
toggle the following Radio Data System
information display modes.
Program Service
Program service name, frequency
Program Type
Program type, frequency
Radio Text
Radio text, frequency
Clock Time
Clock time, frequency
DSP Program
Current sound field program (page 26), frequency
Audio Decoder
Current audio decoder (page 28), frequency
32
En

Radio Data System tuning

Display example (Program Type)
You can select the desired radio program by program type
from the all preset Radio Data System broadcasting
stations.
y
• To select a radio program using PTY Seek, you must first register the
• You can also operate PTY Seek using the GUI screen.
1
2
3
Frequency
Frequency, preset number (if the selected station is
preset)
Back to "Program Service"
SPORT
Selecting the Radio Data System
program type (PTY Seek)
Radio Data System stations (page 30). "No Presets" or "No Presets in
Memory" is displayed if no stations are registered.
Rotate the RINPUT selector (or press
dTUNER) to select "TUNER" as the input
source.
Press rOPTION on the remote control.
The Option menu for "TUNER" is displayed
(page 39).
Press jCursor k / n to select "PTY Seek"
and then press jENTER.