Sharp FD03EB Bedienungsanleitung Seite 8

6
Overview of display and controls
4
5
1. Battery charge level (LED)
2. Level support electric (LED)
3. POWER button
4. "+" button
5. "–" button / walk assist (press more than 3sec to activate walk assist)
power button – Turns the bicycle on and off more than 1 sec.
(The display auto shuts off after few minutes)
+ & – button – Selects pedal assistance
Depending on the mode selected, electric assistance helps you apply
pedaling force.
There are four modes available:
ECO
Level 1 support
Level 2 support
Level 3 support
Change gears
Use the twist grip on the right side of the handlebars to operate the rear
derailleur. A gear engaged indicator, gear selected, is visible next to the
rotating handle.
To operate the derailleur with a twist grip, follow these steps: as follows:
a. Press the pedals forward.
b. Turn the ring (1) by hand clockwise to shift to a smaller sprocket, where
the pedaling eff ort will be greater.
c. Turn the gear shift ring by hand clockwise. counterclockwise to move to
a larger gear, where d. the pedaling eff ort will be less.
Turning the lighting ON and OFF
To turn the lighting ON or OFF, proceed as follows:
Press the switch on the headlight.
1
2
3
NOTES : If you use the light even in broad daylight, other road users will be
more likely to see you.
How to fold the bike
To fold the bike, follow these steps:
a. Release the locking mechanism of the pedals and fold them over the
crank arm.
b. Open the lock lever lock on the frame.
1
c. Fold the frame.
2
1