Saving, Retrieving And Deleting Results - Beurer BC 32 Gebrauchsanweisung

Classification of measurements:
The measurements can be classified and evaluated in
accordance with the following table.
However, these standard values serve only as a general guide­
line, as the individual blood pressure varies in different people
and different age groups etc.
It is important to consult your doctor regularly for advice. Your
doctor will tell you your individual values for normal blood pres­
sure as well as the value above which your blood pressure is
classified as dangerous.
The classification on the display and the scale on the unit show
which category the recorded blood pressure values fall into.
If the values of systole and diastole fall into two different cate­
gories (e.g. systole in the 'High normal' category and dias­
tole in the 'Normal' category), the graphical classification on
the device always shows the higher category; for the example
given this would be 'High normal'.
Blood pressure Systole
value category (in mmHg)
Setting 3: ≥ 180
severe hyper­
tension
Setting 2: 160 – 179 100 – 109
moderate hyper­
tension
Setting 1: 140 – 159 90 – 99
mild hyperten­
sion
Diastole Action
(in mmHg)
≥ 110 seek medical
attention
seek medical
attention
regular monitoring
by doctor
Blood pressure Systole
value category (in mmHg)
High normal 130 – 139 85 – 89
Normal 120 – 129 80 – 84
Optimal < 120
Source: WHO, 1999 (World Health Organization)

6. Saving, retrieving and deleting results

• The results of each successful measurement are stored
together with date and time. With more than 60 items of
measured data, the earliest items of data measured are lost.
• Select the desired user memory by pressing the M button
and then the + button. Press the M button again to display
the average of all saved measurements in the user memory.
Press the M button again to display the average day meas­
urement for the last 7 days. (day: 5.00 a.m. – 9.00 a.m., dis­
play ) . Press the M button again to display the average night
measurement for the last 7 days (night: 5.00 p.m. – 9.00 p.m.,
display ) . If you continue pressing the M button, the latest
individual results are displayed with date and time.
• To clear the memory, press the M button, then the display
shows Press the + button to select the user memory
and confirm by pressing M again. Press and hold the + and
keys simultaneously for 5 seconds (the display will show
).
• If you wish to change the user memory, see "Select memory"
18
Diastole Action
(in mmHg)
regular monitoring
by doctor
self­monitoring
< 80 self­monitoring