Cleaning And Care; Technical Details - Beurer BM 44 Gebrauchsanweisung

The limit values for the technical alarm are factory set and can­
not be adjusted or deactivated. These alarm limit values are
accorded second priority under the standard IEC 60601­1­8.
The technical alarm is a non­locking alarm and must not be
reset. The signal shown on the display will disappear automati­
cally after about 8 seconds.

7. Cleaning and care

• Clean your device and cuff carefully only with a slightly
moistened cloth.
• Do not use any detergents or solvents.
• Never hold the instrument under water as otherwise liquid
can penetrate and damage the instrument.
• Never place any heavy objects on the instrument.

8. Technical details

Model no. BM 44
Measurement Oscillometric, non­invasive blood pres­
method sure measurement on the upper arm
Measurement Cuff pressure 0 – 300 mmHg,
range systolic 60 – 260 mmHg,
diastolic 40 –199 mmHg,
Pulse 40 –180 beats/minute
Display accuracy Systolic ± 3 mmHg,
diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Measurement Max. permissible standard deviation
inaccuracy according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Dimensions L 94 mm x W 122 mm x H 53 mm
Weight Approx. 230 g (without batteries)
Cuff size 22 to 30 cm
Permissible oper­ + 10 °C to + 40 °C, ≤90 % relative air
ating conditions humidity (non­condensing)
­ 20 °C to + 55 °C, ≤90 % relative air
Permissible stor­
age conditions humidity, 800 –1050 hPa ambient pressure
Power supply 4 x 1,5 V
Battery life For approx. 600 measurements, depend­
ing on the blood pressure level and/or
pump pressure
Accessories Instruction for use, 4 x 1.5 V AA batteries,
storage pouch
Classification Internal supply, IPX0, no AP or APG,
continuous operation, type BF applied
part
24
AA batteries