Herunterladen Inhalt Inhalt Diese Seite drucken

Beurer BM 44 Gebrauchsanweisung Seite 22

Vorschau ausblenden Andere Handbücher für BM 44:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Measuring blood pressure
• Switch on the blood pressure monitor with the start/stop
button
.
• Before the measurement, the last saved test result is brief­
ly displayed. If there is no measurement in the memory,
the instrument always displays the value .
• The cuff automatically inflates. Cuff air pressure is re­
leased slowly.
If a tendency towards high blood pressure is already
detectable, the cuff is pumped up again and cuff pressure
increased further. As soon as a heart rate is detected, the
heart rate symbol
is displayed.
• Heart rate, systolic and diastolic blood pressure are dis­
played.
• You can interrupt measurement at any time by pressing
the start/stop button
_ appears if it has not been possible to perform the
measurement properly. Observe the section in these in­
structions on error messages/troubleshooting and repeat
the measurement.
• The test result is saved automatically.
• To switch off and release the pressure, press the start/
stop button
again. If you forget to switch off the device,
it switches off automatically after approx. 1 minute.
Wait at least 5 minutes before taking another measurement!
.
Evaluating results
Cardiac arrhythmia:
This instrument can identify possible cardiac arrhythmia dis­
orders during measurement and if necessary indicates the
measurement with the flashing icon
This may be an indicator for arrhythmia. Arrhythmia is a
condition where the heart rhythm is abnormal as a result of
defects in the bioelectrical system controlling the heart beat.
The symptoms (omitted or premature heart beats, slow or
excessively fast heart rate) may be caused, among other
things, by heart disease, age, physical predisposition, exces­
sive use of stimulants, stress or lack of sleep. Arrhythmia
can only be ascertained through examination by your doctor.
Repeat the measurement if the flashing icon
played after the measurement. Please note that you should
rest for 5 minutes between measurements and not talk or
move during the measurement. If the icon
often, please contact your doctor. Any self­diagnosis and
treatment based on the test results may be dangerous. It is
vital to follow your doctor's instructions.
Classification of measurements:
The measurements can be classified and evaluated in
accordance with the following table.
However, these standard values serve only as a general gui­
deline, as the individual blood pressure varies in different
people and different age groups etc.
22
.
is dis­
appears

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis