Operating Precautions - Dover Vsg Rav.535 .196200 Serie Betriebs- Und Wartungsanleitung

8.4 Operating precautions

The operator must also observe the following safety procedures:
- Check that no hazardous situations arise while work is being carried out. Stop the machine immediately if any
malfunctions are observed and contact the technical service department of your authorised dealer.
- Check that the working area around the machine is free of potentially hazardous objects and no oil (or other slippery
material) has been spilled on the floor as this could constitute a potential hazard for the operator.
- The operator must wear suitable work clothing, safety goggles, gloves and mask to avoid damage caused by dust
or impurities. Dangling objects, such as bracelets or similar items must not be worn, long hair must be tied back,
footwear must be suitable for the work being done.
- Check that dismantling any part of the vehicle does not alter the load distribution beyond pre-defined acceptable limits.
- Set the main switch to zero, padlocking it in position when carrying out any work on the vehicle in the raised position.
- Ensure the vehicle rests stably on the supporting elements as soon as the platform start rising.
- Ensure no conditions arise that could expose persons or equipment to hazards while raising and lowering the vehicle.
- Stop the lift immediately in the event of a malfunction and contact authorised maintenance personnel.
- Do not tamper with the safety equipment and devices.
Always adhere scrupulously to the applicable accident-prevention regulations.
115
0579-M2300-0
Rev.n.0 (09/2025)
INDICE