Pneumatic System Connections - Dover Vsg Rav.535 .196200 Serie Betriebs- Und Wartungsanleitung

7.5 Pneumatic system connections

Prepare a pressure regulator with a maximum setting of 10 bar; the air supply must be filtered and lubricated.
- Connect the pneumatic supply in C.
- Connect the pipe B to the solenoid valve EV2.
- Perform a couple of strokes.
- Actuate the down button (1) and check that there are approx. 8mm between the teeth of the clamp (2) and those
of the toothed bar (3).
EV2 B
IG
102
C
1
0579-M2300-0
Rev.n.0 (09/2025)
P1
P2
B
2
3
INDICE