Safety Regulations - Condtrol Smart 2D Plus Bedienungsanleitung

EN
LASER LEVEL

SAFETY REGULATIONS

Attention! The user manual should be read carefully before you
use the device for the first time. Unintended use of the device can
be dangerous for human's health and cause serious injury. Keep this
user manual. If the device is given to somebody for temporary use,
be sure to enclose user manual to it.
- Do not misuse the device.
- Do not remove warning signs and protect them from abrasion,
because they contain information about safe operation of the device.
- Do not look into the laser beam or its reflection, with unprotected
eye or through an optical instrument. Do not point the laser beam at
people or animals without the need. You can dazzle them.
- To protect your eyes close them or look aside.
- Always install the product in such a way, so that the laser line is
below or above the eye level.
- Do not let unauthorized people enter the zone of product
operation.
- Store the product beyond reach of children and unauthorized
people.
- It is prohibited to disassemble or repair the product yourself.
Entrust product repair to qualified personnel and use original spare
parts only.
- Do not use the product in explosive environment, close to
flammable materials.
- Avoid heating the batteries to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash it
immediately with soap and water. In case of contact with eyes, flush
with clean water during 10 minutes and consult the doctor.
4 4
CONDTROL SMART 2D Plus
Laser radiation!
Do not stare into beam
Class 2 laser
<1 mW, 520 nm
IEC 60825-1:2014
user manual