Safety Instructions; Intended Use; Set - CONDTROL Auto RotoLaser Bedienungsanleitung

CONDTROL Auto RotoLaser
EN
ROTARY LASER

SAFETY INSTRUCTIONS

Attention! This user manual is an essential part of this product.
The user manual should be read carefully before you use the product
for the first time. If the product is given to someone for temporary
use, be sure to enclose user manual to it.
- Do not misuse the product
- Do not remove warning signs and protect them from abrasion,
because they contain information about safe operation of the
product.
Laser radiation!
Do not stare into beam
Class 2 laser
<1 mW 635 nm
EN60825-1: 2007-03
-Do not look into the laser beam or its reflection, with unprotected
eye or through an optical instrument. Do not point the laser beam at
people or animals without the need. You can dazzle them.
-To protect your eyes close them or look aside.
- Always install the product in such a way, so that laser line is below
or above eye level.
- Do not let unauthorized people enter the zone of product operation.
- Store the product beyond reach of children and unauthorized
people.
- It is prohibited to disassemble or repair the product yourself. Entrust
product repair to qualified personnel and use original spare parts
only.
- Do not use the product in explosive environment, close to flammable
materials.
4
EN
ROTARY LASER
user manual
- Laser intensive glasses are used for better recognition of the laser
beam, do not use them for other purposes. Laser glasses do not
protect from laser radiation as well as ultraviolet radiation and reduce
color perception.

INTENDED USE

CONDTROL Auto RotoLaser – self-levelling rotary laser level, designed
for construction workers, plasterers, and contractors intended to
build vertical and horizontal planes, plumb line (zenith). The product
has scan function that allows building only a part of laser plane
defined by user.
The product is suitable for use at both indoor and outdoor building
areas

SET

Rotary laser – 1 pc.
Universal mount on wall/tripod 5/8'' – 1 pc.
Batteries – 4 pcs.
Battery charger – 1 pc.
Laser receiver – 1 pc.
Mount for laser receiver – 1 pc.
Remote control – 1 pc.
Laser intensive glasses – 1 pc.
Magnetic target board – 1 pc.
User manual – 1 pc.
Plastic case – 1 pc.
CONDTROL Auto RotoLaser
user manual
5