Safety Instructions; Intended Use; Set - CONDTROL Super RotoLaser Bedienungsanleitung

CONDTROL Super RotoLaser
EN
ROTARY LASER

SAFETY INSTRUCTIONS

Attention! This user manual is an essential part of this product.
The user manual should be read carefully before you use the product
for the first time. If the product is given to someone for temporary
use, be sure to enclose user manual to it.
- Do not misuse the product
- Do not remove warning signs and protect them from abrasion,
because they contain information about safe operation of the
product.
-Do not look into the laser beam or its reflection, with unprotected
eye or through an optical instrument. Do not point the laser beam at
people or animals without the need. You can dazzle them.
-To protect your eyes close them or look aside.
- Always install the product in such a way, so that laser line is below
or above eye level.
- Do not let unauthorized people enter the zone of product operation.
- Store the product beyond reach of children and unauthorized
people.
- It is prohibited to disassemble or repair the product yourself. Entrust
product repair to qualified personnel and use original spare parts
only.
- Do not use the product in explosive environment, close to flammable
materials.
- Laser intensive glasses are used for better recognition of the laser
4
EN
ROTARY LASER
user manual
beam, do not use them for other purposes. Laser glasses do not
protect from laser radiation as well as ultraviolet radiation and reduce
color perception.
- Avoid heating the batteries to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash it
immediately with soap and water. In case of contact with eyes, flush
with clean water during 10 minutes and consult the doctor.

INTENDED USE

CONDTROL Super RotoLaser – self-levelling rotary laser level,
designed for construction workers, plasterers, and contractors
intended to build vertical and horizontal planes, plumb lines (zenith,
nadir). The product has scan function that allows building only a part
of laser plane defined by user, as well as build inclined planes tilted up
to ±10% for the axes X and Y.
The product is suitable for use at both indoor and outdoor building
areas.

SET

Rotary laser – 1 pc.
Batteries – 4 pcs.
Reserve battery unit – 1 pc.
Battery charger – 1 pc.
Laser receiver – 1 pc.
Mount for laser receiver – 1 pc.
Laser intensive glasses – 1 pc.
Magnetic target board – 1 pc.
Remote control – 1 pc.
User manual – 1 pc.
Plastic case – 1 pc.
CONDTROL Super RotoLaser
user manual
5