Parkside PAHE 20-Li E5 Originalbetriebsanleitung Seite 79

NOTE
► The vibration emission values and the
noise emission values given in these
instructions have been measured in
accordance with a standardised test
procedure and can be used for com-
parison of the power tool with another
tool.
►
and the noise emission values can
load estimate.
WARNING!
► Depending on the manner in which
the power tool is being used, and in
emission values can deviate from the
values given in these instructions dur-
ing actual use of the power tool.
► It is necessary to establish safety
measures to protect the operator
based on an estimation of the vibra-
tion load during actual use (all states
of operation must be included, e.g.
times when the power tool is switched
Read the operating instruc-
initial operation!
Wear protective gloves!
Wear ear protection!
|
GB / MT
Wear a hard hat!
the appliance!
Do not use chain saw one-
handed!
Always use chain saw two-
handed!
and avoid contact with bar tip!
Protect the appliance against
rain or moisture!
overhead lines and at least
Caution! Falling objects.
Especially when cutting above
head height.
running blades.
in dB.
work!!
operation.
Minimum/maximum level
MIN/MAX
-