■
When starting and operating the appli-
ance, ensure that it does not come into
contact with the ground, stones, wire or
other foreign material. Switch the appli-
■
The device is designed for two-handed
■
Hold the appliance only by the insulated
handles as the saw chain could come
into contact with hidden power lines.
Contact between the saw chain and a
of the power tool live and could give the
■
that you cannot accidentally touch the
wards. Fit the blade guard during trans-
portation.
■
every cut and do not start until this has
been done.
■
Be extremely careful when sawing small
bushes and branches. The thin branches
■
Do not cut any wood that is lying on the
ground and do not attempt to saw roots
that are protruding from the soil. Avoid
immersing the saw chain in the soil at all
costs, as this could blunt the saw chain.
■
When sawing a branch under tension,
be aware of the possibility of the branch
injury.
■
Do not use force to free the appliance if
the cutting tools get caught or jammed
immediately and do not switch it on until
|
GB / MT
■
We recommend attending a course on
the use and maintenance of pole prun-
longed periods of non-use, and for prac-
cuts in securely supported wood before
starting in order to re-familiarise yourself
with the appliance.
■
Even if you operate this power tool
properly, there will still be residual
in the context of the design and con-
struction of this power tool:
hearing protection is worn.
-
arm vibrations if the appliance is
used for extended periods or is not
properly used and maintained.
Original accessories/auxiliary
equipment
■
Use only the additional equipment
and accessories detailed in the oper-
ating instructions. The use of tools and
accessories other than those recom-
mended in the operating instructions
sonal injury for you.
WARNING!
■
Do not use any accessories which are
not recommended by PARKSIDE. This
-
-