Charging The Battery Pack; Checking The Battery Charge Level; Fixing/Attaching The Shoulder Strap; Mounting The Saw Chain And Blade - Parkside Pahe 20-Li E5 Originalbetriebsanleitung

Charging the battery pack

CAUTION!
► Always unplug the appliance before
high-speed charger
NOTE
►
to be stored for an extended period,
regularly. The optimum charge level is
climate should be cool and dry and
the ambient temperature should be
♦
speed charger
♦ Insert the power plug into the mains
will light up.
♦ The green control LED
the charging process is complete and
CAUTION!
♦ If the red control LED
overheated and cannot be charged.
♦ If the red and green control LEDs
fective.
♦
appliance.
from
.
to the high-
.
indicates that
is ready for use.
has
is de-
Attaching/disconnecting the battery
Attaching the battery pack
♦
the rear handle
Removing the battery pack
♦ Press the release button

Checking the battery charge level

♦ Press the battery charge level button
The status/remaining charge will be
shown on the battery display LED
as follows:
RED/ORANGE/GREEN =
maximum charge/performance
RED/ORANGE =
medium charge/performance

Fixing/attaching the shoulder strap

♦
rying lug .
♦ Adjust the length of the shoulder strap
to your size so that carrying lug
♦ In addition, you can adjust the height
of the carrying lug
shaft by loosening the screw.

Mounting the saw chain and blade

WARNING!
► Wear protective gloves! There is a
danger of injury from the sharp cutting
teeth!
►
chain tensioning ring
screw are not pre-assembled on
the appliance at delivery.
► The turning of the blade
tended by the manufacturer.
► The chain travel direction
blade must be adhered to every
assembly.
of the appliance.
and remove
.
into the car-
on the appliance
together with the
is not in-
on the
|
GB / MT
is