Data Protection Notice; Privacy Policy; Transport; Cleaning, Maintenance And Storage - Parkside Performance Pwsap 20-Li F6 Originalbetriebsanleitung

GB
MT
ted, the "Connected" indicator lights up
continuously.
3. Open the PARKSIDE app.
4. You r too ls.
The device is displayed in the list.
If the device does not appear in the list,
add the device manually.
Monitoring and controlling the device
1. You r too ls.
2. Select the device from the list.
The device overview page is displayed.
3. Select the desired setting on the over-
view page.
Select Help if you are unsure.
A dialogue box with a description for the
relevant setting is displayed.

Data protection notice

Please note that each end user is respons-
ible for deleting the data on the old devices
to be disposed of.
Removed the device from the app
When a device is removed from the app, the
associated data is also deleted.
1. You r tool s.
2. ⬅ 䐆 Swipe the device's card from right
to left.
3. Confirm the dialog box.

Privacy policy

see Page More; Section Legal,
policy

Transport

Notes
• Turn off the device.
• Make sure that all moving parts have
come to a complete stop.
• Remove the rechargeable battery.
• Remove the attachment tool.
• Always carry the device by the handle (1).
Cleaning, maintenance and

storage

WARNING! Risk of injury due to unin-
tentional start-up. Protect yourself when
40
performing maintenance or cleaning work.
Switch off the device and remove the battery
(22).
You should have any repair and maintenance
work that is not described in these instruc-
tions carried out by our Service Centre. Only
use original replacement parts.

Cleaning

WARNING! Electric shock! Never spray
down the device with water.
NOTICE! Risk of damage. Chemical sub-
stances may attack the plastic parts of the
machine. Do not use any cleaning agents or
solvents.
• Keep the ventilation slits, motor housing
and handles of the machine clean. Use a
damp cloth or brush to do this.
Cleaning the dust protection grille
(Fig. E)
• Clean the dust protection grille (3) with a
brush.
• You can remove the dust protection grille
for thorough cleaning. To do this, insert a
narrow slotted screwdriver at the marked
point.
Replace a defective dust protection grille
(Spare parts and accessories, p. 43).

Maintenance

The device is maintenance free.
Storage
Always store the device and accessories:
• clean
Privacy
• dry
• protected against dust
• In the case provided (29)
• out of the reach of children
The storage temperature for the re-
chargeable battery and the device is
between 0 °C and 45 °C. Avoid extreme cold
or heat during storage to ensure the battery
output is not adversely affected.
Remove the rechargeable battery from the
device before storing the device (see the
separate operating instructions for the bat-
tery and charger).
Storing cutting/grinding discs
• dry
• upright
• unstacked