Data Protection Notice; Privacy Policy; Cleaning, Maintenance And Storage; Cleaning - Parkside Performance Ppwsfa 20-Li C4 Originalbetriebsanleitung

The device communicates with the
app via the battery.
Connecting the device to the
PARKSIDE app
1. Insert the smart battery (22).
2. Press the Unlock button (13).
The "Connected" indicator (10)
flashes three times. When the
device is connected, the "Connec-
ted" indicator lights up continu-
ously.
3. Open the PARKSIDE app.
4. Your tool s.
The device is displayed in the list.
If the device does not appear in
the list, add the device manually.
Monitoring and controlling the
device
1. Your tool s.
2. Select the device from the list.
The device overview page is dis-
played.
3. Select the desired setting on the
overview page.
Select Help if you are unsure.
A dialogue box with a descrip-
tion for the relevant setting is dis-
played.

Data protection notice

Please note that each end user is re-
sponsible for deleting the data on the
old devices to be disposed of.
Removed the device from the app
When a device is removed from the
app, the associated data is also de-
leted.
1. Your to ols.
2. ⬅ 䐆 Swipe the device's card from
right to left.
3. Confirm the dialog box.

Privacy policy

see Page More; Section Legal,
Privacy policy

Cleaning,

maintenance and
storage
WARNING! Risk of injury due to
unintentional start-up. Protect your-
self when performing maintenance or
cleaning work. Switch off the device
and remove the battery (22).
You should have any repair and main-
tenance work that is not described in
these instructions carried out by our
Service Centre. Only use original re-
placement parts.
Cleaning
WARNING! Electric shock! Never
spray down the device with water.
NOTICE! Risk of damage. Chemic-
al substances may attack the plastic
parts of the machine. Do not use any
cleaning agents or solvents.
• Keep the ventilation slits, motor
housing and handles of the ma-
chine clean. Use a damp cloth or
brush to do this.
Cleaning the dust protection grille
(Fig. E)
• Clean the dust protection grille (3)
with a brush.
• You can remove the dust protec-
tion grille for thorough cleaning.
To do this, insert a narrow slotted
screwdriver at the marked point.
Replace a defective dust protec-
tion grille (Spare parts and ac-
cessories, p. 53).

Maintenance

The device is maintenance free.
GB MT
49