EN
5. The individual symbols sequentially appear or fade out during selection with the buttons (4) and (5)
and the control panel located in the suction hose holder (11).
CAUTION! If the suction pipe is clogged or the dust bag is filled to the maximum, the
bag fill indicator will light up on the display (3). It is then necessary to replace the dust
bag or remove the cause of the clogged suction pipe.
6. The vacuum cleaner can also be switched on and off and the suction power can be adjusted on the
panel (12) located in the suction tube holder (11).
7. In order to position the appliance in an optimal way after work, use the parking guide (19) located
in the rear part of the vacuum cleaner. Place the rail at the back of the floor-carpet brush with the
connected suction hose and telescopic tube on the rail. The second guide, which facilitates the
storage of the vacuum cleaner in the vertical position is located underneath the appliance.
DESCRIPTION OF ACCESSORIES
FLOOR AND CARPET BRUSH
It is designed for the cleaning of large and flat surfaces. It is equipped with wheels which
facilitate movement in hard-to-reach areas and a flexible joint which connects it to the
suction hose, allowing it to be guided at different angles. When the button on the top of
the brush is pressed ( switching it to the brush mode), a row of stiff bristles will appear on
the underside of the attachment, allowing hard floors to be cleaned.
SMALL BRUSH
It is designed for collecting dust and removing dirt from flat surfaces, furniture, upholstery
and mattresses. Owing to its smaller size, it proves its value in vacuuming hard-to-reach
areas, where the floor-carpet brush does not fit.
28
curtains, textiles
upholstered furniture, pillows
carpets and fitted carpets
hard floors and parquets
floor panels, heavily soiled carpets and fitted carpets