Tape Playback - Panasonic Rq-L340 Bedienungsanleitung

POWER SOURCE
• Battery removal
Press the battery "2" toward the (3 battery termi-
nal and remove it.
• Battery life
Battery condition can be checked by the record-
ing/battery check indicator during recording.
•AC mains operation
Connect the AC adaptor (use only Panasonic AC
adaptor, RP-AC31, optional) as shown in the
figure.
To operate on battery power, unplug the AC adap-
tor unit from the household AC power outlet and
the DC input jack from the unit.
8
To prevent possible damage to this unit
• Load new battery with their polarities (O and 9)
aligned correctly.
•Do not apply heat to batteries, or internal short-
circuit may occur.
•If this unit is not to be used for a long period of
time, or used on AC mains supply, remove the
batteries and store them in a cool and dry place.
•Remove spent batteries immediately.
•Do not use old and new batteries together.
Also never use an alkaline battery with a manga-
nese battery.
TAPE PLAYBACK
Use normal type of cassette tape only.
Openthe cassettecompartment c overwith
I.
your hand.
Insert a cassette as shown in the figure, and
then close the cassette compartment cover.
Set the VAS/pauseswitch to the "OFF" po-
2.
sition.
Set the tape speed control to the center
3.
click position.
Pressthe playback button to begin the tape
4.
playback.
Adjust the volume control as desired.
5.
Set the tone/sound level equalizer switch at
6.
a desired position.
To stop the playback, press the stop
7.
button.
Auto stop
During playback or recording,when the tape
reaches its end, the automatic stop system will
release the playback andrecordbuttonsandauto-
maticallyturn off me unit.
9