Inspecting And Replacing The Cutting; Blade (23) - Al-Ko Solo R74.5 Li 36V Betriebsanleitung

GB
Activity
Inspect all buttons and
switches for damage.
Check the function of the
drive pedals and the service
brake (press and release).
Check the function of the
brake pedal (carry out a test
braking on a straight road).
Check the tyre pressure.
Check the cutting blades.
Inspect the device for loose
parts (e.g. screws, bolts) and
retighten, if necessary.
Inspect the safety and protec-
tive devices.
With the mower mechanism
switched on, pay attention to
unusual noise and vibration.
The mower mechanism must
switch off if the reverse pedal
is pressed without pressing
the "Reverse mowing" button.
Clean the ride-on mower.
Grease the swivel joints of
the pedals.**
Grease the toothed segment
and steering pinion on the
steering box.**
Grease all moving parts of
the steering system.**
Grease all moving pivot and
bearing points.**
Oil the attachment points of
the mower deck
* OH: Operating hours, **: with multi-purpose grease/spray grease
Greasing procedure
Use a cloth to clean all points to be lubricated be-
fore greasing or spraying. Do not use water in or-
der to avoid possible corrosion.
58
Before After
each use each use
X
X
X
X
X
X
X
X
X
X
Every 10 Every 25
OH* OH*
X
X
X
X
X
8.5

Inspecting and replacing the cutting

blade (23)

Make sure that the cutting blades remain sharp
for the entire mowing season to avoid shredding
or tearing the blades of grass. Shredded grass
blades turn brown at the edges. This reduces
Maintenance and care
Every 50 Before
OH* every
storage
X
X
X
X
X
X
X
X
X
R74.5 Li 36V