Drive Pedals (03); Brake Pedal (04); Parking Brake (04); Mower Mechanism Switch (05) - Al-Ko Solo R74.5 Li 36V Betriebsanleitung

GB
Item Description
13 LED strip:
■
Lights up green: Normal operation.
■
Lights up red:
■
Grass catcher is full.
■
Parking brake is engaged.
■
Flashes red:
■
Average charge status of all
the batteries is below 30%.
14 Charge status display: Displays the av-
erage charge status of all the batteries.
15 Status indicator of the mower mecha-
nism switch:
■
Lit: Mower mechanism engaged.
■
Not lit: Mower mechanism disen-
gaged.
16 Error display: Lights up if a malfunction
occurs (see chapter 9 "Help in case of
malfunctions", page 59). Or contact
your dealer.
17 Speed of the cutting blades: Lights up
at high speed.
18 Speed of the cutting blades: Lights up
at medium speed.
19 Speed of the cutting blades: Lights up
at low speed.
20 Occupied battery compartments: Indi-
cates the battery compartments in
which batteries are inserted.
3.7.3 Drive pedals (03)
Pressing a drive pedal switches on the drive mo-
tor. The further you press the drive pedal, the
faster the ride-on mower drives in the selected di-
rection.
To stop, release the drive pedal and press the
brake pedal.
Item Description
1 Forwards pedal
48
Item Description
2 Reverse pedal
Precondition for mowing in reverse:
The "Reverse mowing" button has
been pressed.
3.7.4 Brake pedal (04)
The brake pedal is used for:
■
Immediately stopping the ride-on mower
■
Engaging the parking brake
Item Description
1 Brake pedal
3.7.5

Parking brake (04)

Precondition: The brake pedal is pressed down
completely.
Item Description
2 Parking brake control lever
a Push the control lever upwards: En-
gage the parking brake, i.e. the wheels
of the ride-on mower are blocked. The
"Parking brake" status indicator (02/7)
lights up.
b Pressing the brake pedal again deacti-
vates the parking brake.
3.7.6

Mower mechanism switch (05)

The mower mechanism motors are switched on
and off with the mower mechanism switch.
Item Description
1 Mower mechanism switch
a Pull the switch upwards: Switch on the
mower mechanism.
b Push the switch downwards: Switch off
the mower mechanism.
3.7.7

Adjusting lever for cutting height (06)

The cutting height can be adjusted in 6 steps.
Product description
R74.5 Li 36V