Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
7
Product description
a
B
B
a
a
a
a
a
a
IIII
m
Upper rack
Cutlery rack
Foldable flaps
Upper rack height adjuster
Upper sprayer arm
Lower rack
Lower sprayer arm
Filter Assembly
Salt reservoir
Detergent and Rinse Aid dispensers
Control pannel
I=
U n n n M n
llllIHIBUl
n\ \
Control panel
a
Dan a
n_aa
BIll a
aH
a
H
B
a
a
a
a
On-Off/Reset button with indicator light
Program selection button
Salt refill indicator ligh
Rinse Aid refill indicator IIgh
Program number and delay time indicator
Tablet indicator light
Display
a
a
ED
a
a
a
Flexible Wash indicator light
Flexible Wash button
Delay button
Short Time button with indicator light
Extra Dry button with indicator light
START/Pause button with indicator light / Tab
First Use
Advice regarding the first time use
After installation, remove the stoppers from the racks and the
retaining elastic elements from the upper rack
Remove the lower rack and
unscrew the reservoir cap
(anticlockwise).
Only the first time you do this:
fill the salt reservoir with water.
POSItion the funnel (see figure)
and fill the salt reservoir right up
to its edge (approximately 1 kg); it
is not unusual for a little water to
leak out
Remove the funnel and wipe
any salt residue away from the
openIng
Filling the salt reservoir
The use of salt prevents the formation of LIMESCALE on the
dishes andon the machine's functional components.
• it is mandatory that THE SALT RESERVOIR BE NEVER EMPTY.
• it is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher
(see PRODUCT DESCRIPTION) and should be filled when the
SALT REFILL indIcator light a
in the control panel is lit
4
Werbung
