BWT AQA smart Einbau- Und Bedienungsanleitung Seite 57

SEt
e.g.
5 07:43
r 09:15
r 09:15
e.g.
r 02:00
r 02:00
26:45
rEG On
8.4 Changing the regeneration time
Press Change mode key
Display shows SEt
Regeneration time
The flashing digits can be changed.
Changes the numbers
Moves the cursor
New regeneration time
Finish programming
8.5 Activating regeneration manually
Keep OK button pressed for approx. 4 seconds until
the regeneration cycle begins
Display alternately shows the remaining regene-
ration time in minutes (with flashing symbol) and
rEG On
EN
57
57