Samsung SCR-3000N Bedienungsanleitung Seite 188

DIGITAL VIDEO RECORDER
(2) FROM ALARM EVENT LIST
FROM ALARM EVENT LIST allows you to back up the video and audio data that has been
recorded on the hard drive at the time of an event, which is triggered by alarm input or
motion detection, onto a video tape. The following illustration shows the FROM ALARM
EVENT LIST screen in detail. The EVENT (ALARM), DATE and TIME indicate when the
event was recorded on the hard drive. To exit this screen and return to the MANUAL
ARCHIVE menu, press the MENU button.
ALARM EVENT ARCHIVE
ID EVENT
01 ALARM 2003-07-13 17:25:52 [X]
02 ALARM 2003-07-12 06:37:38 [X]
03 ALARM 2003-07-11 11:54:34 [X]
MOVE=[ /
Use the UP ( ) and DOWN (
❷
ed cursor should appear over the selected item. Press the ENTER (
choice to set the event to [O]. Repeat this procedure for each event you want to back up, and
REC
then press the RECORD (
be backed up first.
Once the backup starts, the following information will be displayed.
Event Index
MACHINE
RECORD START
CH No.
REC MODE
ARCHIVING START : 2003-06-14 09:55:35
ARCHIVING METHOD : MANUAL
ARCHIVE
5-5
[01/03]
DATE TIME
➛ ❿
❷ / / ] START=[REC] EXIT=[MENU]
) buttons to select the event you want to back up. A highlight-
) button to accept the
) button to start the backup. The earliest event occurrence will
: SCR-3000 MACHINE 1
: 2003-06-14 09:45:28
: 1
: 60.00 FPS
2003-06-14 09:45:45
(3) FROM MOTION EVENT LIST
FROM MOTION EVENT LIST allows you to back up the video and audio data that has been
recorded on the hard drive at the time of an event, which is triggered by motion detection,
onto a video tape. The following illustration shows the FROM MOTION EVENT LIST
screen in detail. The EVENT (MOTION), DATE and TIME indicate when the event was
recorded on the hard drive. To exit this screen and return to the MANUAL ARCHIVE menu,
press the MENU button.
MOTION EVENT ARCHIVE
ID EVENT DATE
01 MOTION 2003-07-13 22:42:16 [X]
02 MOTION 2003-07-12 14:24:45 [X]
03 MOTION 2003-07-11 06:13:52 [X]
➛ ❿
MOVE=[ / ❷ / / ] START=[
Use the UP ( ) and DOWN ( ) buttons to select the event you want to back up. A highlight-
❷
ed cursor should appear over the selected item. Press the ENTER (
choice to set the event to [O]. Repeat this procedure for each event you want to back up, and
REC
then press the RECORD ( ) button to start the backup. The earliest event occurrence will
be backed up first.
Once the backup starts, the following information will be displayed.
Event Index
MACHINE : SCR-3000 MACHINE 1
RECORD START : 2003-06-14 09:45:28
CH No. : 1
REC MODE : 60.00 FPS
ARCHIVING START : 2003-06-14 09:55:35
ARCHIVING METHOD : MANUAL
ARCHIVE
2003-06-14 09:45:45
Note Note
- If MULTIPLEXER in the SYSTEM SETUP menu of the DVR MAIN MENU is set to
WITH, MOTION EVENT ARCHIVE will be disabled. To perform the backup, set
MULTIPLEXER in the SYSTEM SETUP menu to WITHOUT.
[01/03]
TIME
] EXIT=[MENU]
) button to accept the
5-6