Menu View - Samsung SCR-3000N Bedienungsanleitung

DIGITAL VIDEO RECORDER
1

Menu View

Entering the DVR MAIN MENU
MENU
Press the MENU ( ) button. Then the following screen should appear.
MAIN MENU(DVR)
CLOCK/DISPLAY MODE SETUP
RECORD MODE SETUP
ALARM RECORD SETUP
TIMER RECORD SETUP
SYSTEM SETUP
COMMUNICATION SETUP
MOVE=[ /
Note
Note
- Make sure that the VCR LED is off before pressing the MENU button. If the VCR
button had been pressed, the VCR MAIN MENU will be displayed.
- You can go into the menu only if the system is in Live Screen mode. If the system is
in Record or Play mode, you cannot go into the menu. To go into the menu, first
stop recording or playback.
Selecting a Menu Item
Use the UP( ) and DOWN( ❷ ) buttons to select the menu item you want. A highlighted cur-
sor should appear over the selected item. Next, press the ENTER(
choice. Settings will be displayed on the left and their values will be displayed on the right.
Changing the Settings
Use the UP( ) and DOWN(
Press the ENTER( ) button to accept the choice.
Use the UP( ) and DOWN(
Press the ENTER( ) button to accept the choice.
When you press the ENTER button, some setting fields are toggled.
4-1
❷ ] SELECT=[ ] EXIT=[MENU]
) button to accept the
) buttons to select the setting you want to change.
❷
❷ ) buttons to change the value.
Move to Parent Menu or Menu End
MENU
Press the MENU( ) button to move to the parent menu from the lower mode or end the
menu.
4-2