Setting Of Date, Time And Screen - Samsung SCR-3000N Bedienungsanleitung

DIGITAL VIDEO RECORDER
Each menu item
CLOCK/DISPLAY MODE SETUP
CLOCK/DISPLAY MODE SETUP
DATE 2003-06-01 SUN
TIME 12:00:00
DATE DISPLAY TYPE YYYY-MM-DD
DATE & TIME DISPLAY ON
DATE & TIME POSITION RIGHT
STATUS DISPLAY ON
STATUS POSITION LEFT
➛ ❿
MOVE=[ / ❷ / / ] SELECT=[ ] EXIT=[MENU]
ALARM RECORD SETUP
ALARM RECORD SETUP
ALARM SIGNAL DETECTION OFF
ALARM SIGNAL POLARITY N.O.
ALARM BUZZER ON
MAIN ALARM TIME 10 SECOND
PRE ALARM TIME LIMIT 2 SECOND
POST ALARM TIME LIMIT OFF
MAIN ALARM PICTURE RATE 30.0 FPS
MOTION DETECTION OFF
SET AREA & SENSITIVITY
MOVE=[ / ❷ / ➛ / ❿ ] SELECT=[ ] EXIT=[MENU]
SYSTEM SETUP
SYSTEM SETUP
PASSWORD ****
PASSWORD LOCK OFF
HDD ERASE OFF
FACTORY RESET OFF
MENU SCREEN DARK GRAY
LANGUAGE ENGLISH
IR REMOCON OFF
MULTIPLEXER WITHOUT
MULTIPLEXER SELECT SAMSUNG SDM-160
➛ ❿
MOVE=[ / ❷ / / ] SELECT=[ ] EXIT=[MENU]
Caution Caution
Upon shipment from the factory, the values of the menu are set as follows.
4-5
RECORD MODE SETUP
RECORD MODE SETUP
DVR INPUT VIDEO-IN
AUDIO RECORD ON
PICTURE QUALITY HIGH
PICTURE RATE 30.00FPS
DISK END MODE OVERWRITE
DISK END BUZZER ON
RECORD TIME MARK ON
TIME MARK POSITION RIGHT
MOVE=[ / ❷ / ➛ / ❿ ] SELECT=[ ] EXIT=[MENU]
TIMER RECORD SETUP
TIMER RECORD SETUP
TIMER DAY START END FIELD RATE
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
OFF --- --:-- --:-- --.--
MOVE=[ / ❷ / ➛ / ❿ ] SELECT=[ ] EXIT=[MENU]
COMMUNICATION SETUP
COMMUNICATION SETUP
BAUD RATE 115,200
NETWORK ACCESS ON
IP ADDRESS 0. 0. 0. 0
GATEWAY 0. 0. 0. 0
SUBNET MASK 0. 0. 0. 0
NETWORK USER ID ****
NETWORK USER PWD ****
PAN/TILT TYPE SCC-421
➛ ❿
MOVE=[ / ❷ / / ] SELECT=[ ] EXIT=[MENU]
2

Setting of Date, Time and Screen

The following illustrates the intial setting of the CLOCK/DISPLAY MODE SETUP menu.
CLOCK/DISPLAY MODE SETUP
DATE
TIME
DATE DISPLAY TYPE
DATE & TIME DISPLAY ON
DATE & TIME POSITION RIGHT
STATUS DISPLAY
STATUS POSITION
MOVE=[ / /
❷
DATE
Set the current date.
TIME
Time can be entered in the form of 24 hours.
Caution
Caution
Be sure to set the date and time to the current date and time.
DATE DISPLAY TYPE
There are 3 date forms to be displayed. You can set in a convenient manner to see.
[YYYY-MM-DD/DD-MM-YYYY/MM-DD-YYYY]
DATE & TIME DISPLAY
Set to ON to display the date and time on the screen, or set to OFF to not display them.
[ON/OFF]
DATE & TIME POSITION
Set the location on the screen where the date and time will be displayed. Set to LEFT to
display it on the top left of the screen, or set to RIGHT to display it on the top right of the
screen. [LEFT/RIGHT]
STATUS DISPLAY
Set to ON to display the system status, such as recording, system lock, to remaining HDD
capacity, and playback information when playing the recorded video; or set to OFF to not
display them. [ON/OFF]
STATUS POSITION
Set the location on the screen where the system status will be displayed. Set to LEFT to
display it on the top left of the screen, or set to RIGHT to display it on the top right of the
screen. [LEFT/RIGHT]
2003-06-01 SUN
12:00:00
YYYY-MM-DD
ON
LEFT
➛ / ❿ ] SELECT=[ ] EXIT=[MENU]
4-6