Scheppach SM200L Originalbetriebsanleitung Seite 21

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
The operating manual is part of this product. It includes
important instructions for the safe, proper and econom-
ic operation of the product, for avoiding danger, for min-
imising repair costs and downtimes and for increasing
the reliability and extending the service life of the prod-
uct. In addition to the safety instructions in this operat-
ing manual, you must also observe the regulations ap-
plicable to the operation of the product in your country.
Familiarise yourself with all operating and safety in-
structions before using the product. Only operate the
product as described and for the specified areas of ap-
plication. Keep the operating manual in a good place
and hand over all documents when passing the product
on to third parties.
2. Device description (Fig. 1)
Illustrations similar to:
Art. no. 5903109901/ Art. no. 5903110901
1. Protective panel
2. Spark protection
3. Grinding disc
4. Tool support
5. LED work lamp
6. Grinding disc guard
7. Hole for workbench assembly
8. Main switch (On/Off)
3. Scope of delivery / Unpacking
Item Quantity
1x
3
3
1 2x
5 2x
4x
4 2x
1x
1x
4. Proper use
The bench grinder is a combination device for grind-
ing and polishing metals, plastics and other materials
using the appropriate grinding discs.
The machine complies with the applicable EC machin-
ery directive.
• The safety, operating and maintenance specifica-
tions of the manufacturer, as well as the dimensions
specified in the technical data, must be observed.
• Relevant accident prevention regulations and oth-
er generally recognized safety and technical rules
must also be observed.
• The machine may only be used, maintained or re-
paired by competent persons who are familiar with it
and have been informed of the dangers. The manu-
facturer shall not be liable for damage resulting from
unauthorised changes to the machine.
• The machine may only be operated with original ac-
cessories and original tools from the manufacturer.
• The machine may only be used in the intended
manner. Any use beyond this is improper. The user/
operator, not the manufacturer, is responsible for
damages or injuries of any type resulting from this.
www.scheppach.com
Designation
Bench grinder
Grinding disc (right grit: 60, left:
36)
Art. no. 5903109901
Grinding disc (right grit: 100,
left: 60)
Art. no. 5903110901
Protective panel
LED work lamp
Type AAA batteries
Tool support
Assembly material
Operating manual
GB | 21