Operation; General Information; Preparing For Unit Start-Up - Kärcher BR 550 XL BAT Bedienungsanleitung

English
I. OPERATION

General Information

Preparing for Unit
Start-up
The Floor Cleaners are intended for use with 24 V d.c. They are powered
by 4 x 6 V batteries connected in series. The batteries are supplied ex-
works with models 1.067-804. (For 1.067-803 – see section "Battery
Types and Chargers").
The floor cleaners have been designed so that the user can easily
recognize and operate all functions. The operating console contains all
the switches and indicators, the functions of which are represented by
symbols.
a) After removing the outer packaging, leave the unit on the wooden
palette. The boards at the side of the packaging are used to construct
a ramp.
b) Before opening the tank loosen the screw placed in the locking
handle. Release the unit cover retaining mechanism, and lift open the
unit cover.
c) Batteries to be provided! – see chapter "II. Batteries"
d) The batteries must be installed and connected by a qualified person.
The batteries are placed on the tray as shown in the drawing below,
and connected together using the supplied cables (remember to
grease terminals). Insert key in switch (F), and turn to position "0".
The connecting cable supplied with the unit is attached to the two
remaining (+) and (–) battery terminals. Caution: ensure poles are
connected correctly! Connect the red plug on the cable to the red
socket on the unit. Release the retaining mechanism at the side of the
unit, and close the unit cover.
Batteries must be charged before first use!
BR 550 XL BAT
23