Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Controller pairing
1. Turn off the main light switch in the room where you have installed your fan for at least 10
seconds.
2. Turn the switch on and you will hear a beep, within 3 seconds, press and hold the on/off
button until you hear a beep.
3. If the pairing process is unsuccessful, repeat the above steps again after turning off the
wall switch for at least 1 minute.
LIGHT
Turns the fan light on and off regardless of
whether the fan is running or not.
ON/OFF
Turns the fan on or off completely, regardless
of whether it has the light on or off.
TIMER
Schedule automatic shutdown by choosing
from the available options.
REVERSE FUNCTION
Change the direction of rotation of the fan blades. The winter function (turn to the right)
forces the hot air accumulated in the ceiling downwards and the summer function (turn to
the left) generates a breeze that cools the environment.
• Mark the correct position of the holes and fix the ceiling bracket using the screws with
metal anchors or screws and washers appropriate to the type of ceiling chosen.
• Check the correct installation of the bracket before hanging the fan. This plate must sup-
port the entire weight of the fan.
INSTALL ATION P RE PAR AT IO N
• To avoid personal injury and injury, make
sure that the place where you are going to
hang the fan allows the blades to be 2.3 m
or more from the ground and 76 cm from the
nearest wall or obstacle.
• Make sure the junction box is adequately
fastened to the building structure and can
support the full weight of the fan.
INSTALLATION INSTRUCTIONS
COLOUR TEMPERATURE
Toggles between the three types of availa-
ble light colour temperatures (warm, neu-
tral, and cool).
FAN INTENSITY
Increase or decrease the rotation speed of
the fan blades.
DISABLE SOUND
By pressing the sound off button you can si-
lence the sounds that the fan makes when
you press any key on the remote control.
76 cm
2.3 m
76 cm
E NGLI SH
9
Werbung
