Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Controller pairing
1. Turn off the main light switch in the room where you have installed your fan for at least 10
seconds.
2. Turn the switch on and you will hear a beep, within 3 seconds, press and hold the on/off
button until you hear a beep.
3. If the pairing process is unsuccessful, repeat the above steps again after turning off the
wall switch for at least 1 minute.
LIGHT
Turn the fan light on and off, regardless whether the fan is running or not.
COLOR TEMPERATURE
Alternates between the three types of available light color temperatures (warm, neutral and cool).
ON OFF
Turn the fan on or off completely, regardless whether the light is on or not.
FAN INTENSITY
Increases or decreases the rotation speed of the fan blades.
TIMER
Schedule automatic shutdown by choosing from the available options.
REVERSE FUNCTION
Changes the direction of rotation of the blades fan. The winter function (turn to the right)
pushes the hot air accumulated in the ceiling downwards and the summer function (turn to
the left) generates a breeze that cools the environment.
DISABLE SOUND
By pressing the sound off button you can silence the sounds that the fan makes when you
press any key on the remote control.
INSTAL L ATION PRE PAR AT I O N
• To avoid personal injury and injury, ensure
that the fan is hung in a location that allows
the blades to be 2.3 m or more from the floor
and 76 cm from the nearest wall or obstacle.
• Make sure the mounting bracket is properly
attached to the building structure and can
support the full weight of the fan.
INSTALLATION INSTRUCTIONS
76 cm
76 cm
2.3 m
E NGLI SH
9
Werbung
