INTERSPIRO INCURVE-E Benutzerhandbuch Seite 14

The apparatus performs a leakage test.
7.
LEAKAGE
TEST
For Tally key activated apparatus the display will read according to the figure
8.
below. If the tally is not inserted from the start the display will first read "INSERT
TALLY" and then "REMOVE TALLY" when the tally has been inserted.
REMOVE
TALLY
Shake the Digital Display Unit when the display reads according to the figure
9.
below. Alarm sound will stop when DDU has been shaken
SHAKE
DDU
Do not move the Digital Display unit when the display reads according to the
10.
figure below. The pre alarm sound and full alarm sound is tested
DO NOT SHAKE
DDU
Press the red button when the display reads according to the figure below.
11.
PRESS RED
Panic alarm sound is tested.
12.
CHECK SOUND
14