Quick Tools QU3202 Bedienungsanleitung Seite 24

a Zwischen Pin 4 und 5 (Heizelement)
b Zwischen Pin 2 und 3 (Sensor)
c Zwischen Pin 1 und Lötspitze
2.9.2 Disassembly of the soldering iron
1. Remove the knurled nut(2) and soldering tip(1).
2. Pull the heating element(3) out of the soldering iron handle(8).
3. Push the connection cable(12) slightly forward.
4. Pull out the sensor(4) incl. circuit board(6) and connection cable from
the soldering iron(8).
NOTE: Do not use metal tools to remove the tip or tip attachment from the
soldering iron.
9
USER MANUAL
<4 Ω
<10 Ω
<2 Ω