Quick Tools QU3202 Bedienungsanleitung Seite 17

• Solders, fluxes and heated materials can develop harmful properties and
should be vacuumed in a controlled manner. Do not breathe these toxic
fumes or gases and provide adequate ventilation.
• Wear protective clothing (protective gloves, safety goggles, etc.) and
avoid contact of the soldering iron with skin and hair or other flammable
materials.
Food is prohibited in this work environment.
• The use for the operation may only take place in a dry indoor area,
protect the device from liquids and moisture, also by possibly damp
hands. Otherwise, short circuits and electrical shocks could be triggered.
• Inform others in the work area that the temperature may be very high
during operation. Switch off the device as soon as the work is finished to
avoid danger.
• Do not leave
After switching off, wait until the heated parts have reached room
temperature when you touch parts or want to change parts.
Measures for a safe working environment:
• Make sure that the device and the shelf are secure. Place the tool on the
shelf when not in use.
• The use of the device by children from 8 years and persons with
disabilities is possible if they are supervised and instructed for safe use.
• Power supply cables must not come into contact with sharp edges, heat or
oils. Damaged connection cables must be replaced by customer service to
prevent potential hazards such as electric shock, short circuits or fire.
• The device must only be operated at the rated voltage and frequency
specified on the device. Use only supplied earthing contact connecting
cables.
• Before use, check the device for damage and the correct fit of the
soldering tip. If damage is detected, it must be switched off. Then please
contact the customer service.
• Use only Quick Original replacement parts.
• When not in use, keep the device away from dust and moisture.
• Pay attention to the respective safety, health and safety regulations.
the device unattended
CAUTION
2
USER MANUAL
while it is in operation.