Standby And Hibernation; Menü And Settings - Quick Tools Qu3202 Bedienungsanleitung

2. Use the ▲/ keys  to change to the desired temperature as the new
SOL value.
Save the newly set temperature by pressing the ★ button for a longer
3.
time (3s).OK is displayed.
4. Perform this procedure for each of the 3 fixed temperatures.
2.4.3 Beep On/Off
When powered, press the ▲ / buttons  simultaneously for 3 seconds. The
sound status is indicated by a symbol in the display.

2.5. Standby and Hibernation

--- and sleep indicates standby mode, the temperature is lowered to 200°C.
If the set temperature is less than 200°C, this function will not be activated.
The standby time can be set from 0 to 99 minutes, after 60 minutes it
automatically switches to sleep mode. The display says OFF.
In standby, the station is activated automatically by touching the soldering
iron.
2.6. Menü and Settings
2.6.1 Access to the menu
1. Turn off the soldering station, press the ▲ / buttons  at the same
time and turn on the soldering station
Press the ▲ /  keys. The display shows "---". The station is in
2.
password entry mode.
2.6.2 Password Entry Mode
NOTE: If the password is entered incorrectly 3 times, the station will switch
back to work mode. Default password: 000
1. The station must be in input mode, "---" is displayed.
2. The password can be entered with the keys ▲ /  (0-9)
5
USER MANUAL