Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Commissioning
System time
The system time can be set manually by the operator or synchronized with a time server. The corre-
sponding preselection is made via the main menu, [Hei-CONTROL Pro] menu item.
Synchronizing system time with NTP server
Select the [NTP Server] option in the [Hei-CONTROL Pro]
t
menu for automatic synchronization.
Confirm with [OK] to close the menu.
t
In the start window, switch to the [System Time] display
t
mode, if necessary, see "System time/timer/stopwatch
display selection" on page 86.
Touch the [System time] function button for about two
t
seconds to open the dialog box to select your time zone:
First touch the [Country] field and select the user
y
country from the following selection list.
Then touch the [Time zone] field to set a specific
y
time zone within the user country, if necessary.
Confirm the new setting with [OK]: The system time is updated automatically via the displayed
t
NTP server.
Setting the system time manually
In the [Hei-CONTROL Pro] menu, deselect [NTP server]
t
option to set the time manually
Confirm with [OK] to close the [Hei-CONTROL Pro]
t
menu and open the start window with the home button.
If necessary, switch to the [System time] display mode,
t
see "System time/timer/stopwatch display selection" on
page 86.
Touch and hold the [System time] function button for
t
about two seconds to open the system time manual
setting dialog box.
Touch the [Date/1] function button and use the keyboard
t
to enter the current date.
Touch the [Time zone/2] function button and select your
t
time zone.
First, tap [Country] and select the user country from
y
the following selection list.
Then tap [Time zone] to set a specific time zone
y
within the user country, if necessary.
Confirm the new setting with [OK].
y
Touch the [Time/3] function button and use the
t
keyboard to enter the current time.
Confirm the new setting with [OK].
t
.
87
Werbung
