axing EOC 30-01 Betriebsanleitung Seite 68

Operation Instructions | Ethernet over Coax Master/Endpoint
4.2.2. EOC frequency range 5 ... 65 MHz
Configure a notch filter for all devices and install a TZU 198-64 low-pass filter on the EoC+RF port of the
master and on all G.hn ports of the endpoints. This results in a reduced data rate.
The Internet from the cable network operator is received at the modem connection of the BSD 963-13N with
the help of a cable modem and forwarded via Ethernet to an EOC Master. The EOC modulates the IP data and
feeds it into the distribution network via a TZU 40-03 feed-in switch. The data can be received at the EoC
endpoints.
The use of a BSD 963-13N antenna socket with return path blocker and a TZU 40-03 or TZU 40-04 inserter is
mandatory in order to achieve sufficient blocking depth for the frequency range of 5...65 MHz. Otherwise there
may be interference with the cable network operator.
Page 18 of 50 AXING-BA_EOC-30-xx.pdf | Technical improvements, changes in design, printing and other errors reserved. | 2024-06-12