Handle Installation; Handle Assembly - Honda EM50IS Bedienungsanleitung

Handle Installation

Install the handle assembly on the generator upper frame using the 12
mm washers, spring washers and handle holder bolts.
TORQUE: 24–29 N·m (2.4–3.0 kgf·m, 17–22 lbf·ft)
HANDLE HOLDER BOLT (2)

HANDLE ASSEMBLY

Operation must be checked after attaching the handle.
To extend handle:
Raise the handle to the horizontal position. The handle will click into
place when locked.
HANDLE
66
SPRING WASHER (2)
12 mm WASHER (2)
HANDLE LEVER