Honda EM50IS Bedienungsanleitung Seite 75

Hanger Kit Installation
1.Position the hanger at the generator's balance point as shown below.
2.Fit the end tabs of the hanger through the bracket slots, and bolt the
brackets to the hanger and tighten securely.
TORQUE: 24–29 N·m (2.4–3.0 kgf·m, 17–22 lbf·ft)
HANGER BRACKET (2)
8×16 mm FLANGE BOLT (4)
HANGER
FUEL TANK HANGER
GENERATOR SIDE
RIB
73